Features
|
- Independently powers the front or rear motors in a dual-motor crawler vehicle
|
- Fully programmable, user-friendly interface with five adjustable parameters: Drag Brake (10 settings); Dead Band (5 settings); Minimum Drive (10 settings); Drive Frequency (10 settings) and Battery Type Selection (NiMH, LiPo and LiFe)
|
- Three fully programmable throttle profiles: Dig Mode, Proportional Dig Mode and Single-Motor Brushed Mode
|
- Applicable for dual brushed or single brushed motor applications
|
- 2-3 cell LiPo/LiFe-compatible using Novak’s auto-detect software
|
- Internal 6V/5A switching regulator
|
|
|
|
Novak’s first dual-motor crawler ESC!
|
Designed especially for crawling, the M2 Dig 3S Dual Brushed ESC offers dual motor compatibility, three programmable throttle profiles, five adjustable parameters and a 6V/5A BEC. Best of all, it’s LiPo- and LiFe-compatible, too!
|
More Features |
- Thermal Overload Protection
- Water-resistant case with gasket seal
- Universal JST input plug for channels 2 and 3
|
- Built-in PC connectivity using Novalink™ offers expanded programming options
- 120-day manufacturer warranty
|
|
|
Specifications |
ESC footprint: 1.16 in x 1.47 in (29.5 mm x 37.3 mm)
Input voltage: 4-9 cell NiMHs or 2-3 cell LiPos/LiFes
On-resistance (dual motor): 0.0016 Ohms @ 25° C trans. temperature
On-resistance (single motor): 0.0008 Ohms @ 25° C trans. temperature
|
Motor limit: 27T (2-cell LiPo); 33T (3-cell LiPo) 540-sized dual brushed motors
BEC: 6V/5A BEC
4 on-board and 2 external status LEDs
Voltage Cut-Off: (when LiPo Cut-Off Circuitry is enabled: 6.25V (2-cell LiPo); 4.75V (2-cell LiFe); 9.75V (3-cell LiPo) & 7.125V (3-cell LiFe)
Power Wires: 14G Super-Flex Copper-Strand Silicone Wire
|
|
|
Home
Shopping
Your
E-mail Newsletter
Wish